Ordering Information

1-2-3 easy process for purchasing GigaProbes(tm) and Accessories:

1. Send us a request for a quote by filling out the form below to include part numbers and how you wish to purchase the items (i.e. Credit Card, PO or Wire Transfer). Part numbers are found at bottom of page.
   
   
2. We will email you a quote that will include price, shipping and tax (only if shipped in California) and deliver dates.
   
   
3. DVT Solutions, LLC  will contact you and take your credit card number, PO or arrange a wire transfer.  If it is a credit card purchase, it will be processed by "Authorize Net" secure credit card process service.

You can shop at [www.gigaprobes.com] online with confidence. We have partnered with Authorize.Net, a leading payment gateway since 1996, to offer safe and secure credit card and electronic check transactions for our customers.

The Authorize.Net Payment Gateway manages the complex routing of sensitive customer information through the credit card and electronic check processing networks (see an online payments diagram). The company adheres to strict industry standards for payment processing, including:

• 128-bit Secure Sockets Layer (SSL) technology for secure Internet Protocol (IP) transactions.

• Industry leading encryption hardware and software methods and security protocols to protect customer information.

• Compliance with the Payment Card Industry (PCI) Data Security Standard.

For additional information regarding the privacy of your sensitive cardholder data, please read the Authorize.Net Privacy Policy. [www.gigaprobes.com] is registered with the Authorize.Net Verified Merchant Seal program

The GigaProbes® DVT30-1MM is a complete interconnect development kit for a TDR hand probing solution to perform full PCB interconnect analysis in both time and frequency modes when the waveforms are process with the Tektronix IConnect® SI Software.  With Two probes, you can measure TDR 50/100 ohm impedance and TDT to extract return and insertion loss S-parameters. Accessories are included to attached the probe to the Tektronix Articulating arms for hand free probing, setting the probe tips pitch and much more. 

Contents of the GigaProbes® DVT30-1MM interconnect develop kit:

• Qty 2: 30 GHz TDR Probes (patent pending) Convertible to Single 50 ohm or Differential 100 ohm, with gold plated Conductive Diamond probe tips for repeatable high-bandwidth TDR measurements when probing at ANY angle
• Qty 2: GPMMA Attaches probe to Tektronix PPM100, PPM203B Articulating arms or any standard micro-positioner
• Qty 1: Stainless Steel 110mm Tweezers for Fine Pitch Probe Adjustments and used to attach ground lead to convert probe to 50 ohms
• Qty 1: Desk-Top 5X Macro-Lens Inspection Station
• Qty 1: Model 10 SMA Wrench (patent pending) with Quick Calibrator Holes to set probe pitch and planarize probes to 0.8 mm, 1.0 mm, or 1.27 mm
• Qty 2: Hand Held Probe Sleeve Adapters with EZ-Hold Foam Cushions
• Qty 4: Right Angle SMA Elbows for easy routing of TDR of SMA cables
• Qty 1: 50 ohm conversion kit includes 2 SMA shorting caps, ground strap and shrink wrap.
• Qty 4: Cable 24GHz SMA-SMA Cables
• Qty 1: Resource CD with IConnect® application notes, data sheets
• * Free Tektronix IConnect® Video Downloadable Training Course and Application Notes

The GigaProbes® DVT30-1MM-1 is a complete interconnect development kit for a TDR hand probing solution for PCB interconnect impedance analysis and Failure Analysis  With One probe, you can measure TDR 50/100 ohm impedance and perform Failure Analysis on PCB's or Device Packages using the Tektronix IConnect® SI software.  Accessories are included to attached the probe to the Tektronix Articulating arms for hand free probing, setting the probe tips pitch and much more. 

Contents of the GigaProbes® DVT30-1MM-1 interconnect develop kit:

• Qty 1: 30 GHz TDR Probes (patent pending) Convertible to Single 50 ohm or Differential 100 ohm, with gold plated Conductive Diamond probe tips for repeatable high-bandwidth TDR measurements when probing at ANY angle
• Qty 2: GPMMA Attaches probe to Tektronix PPM100, PPM203B Articulating arms or any standard micro-positioner
• Qty 1: Stainless Steel 110mm Tweezers for Fine Pitch Probe Adjustments and used to attach ground lead to convert probe to 50 ohms
• Qty 1: Desk-Top 5X Macro-Lens Inspection Station
• Qty 1: Model 10 SMA Wrench (patent pending) with Quick Calibrator Holes to set probe pitch and planarize probes to 0.8 mm, 1.0 mm, or 1.27 mm
• Qty 1: Hand Held Probe Sleeve Adapters with EZ-Hold Foam Cushions
• Qty 2: Right Angle SMA Elbows for easy routing of TDR of SMA cables
• Qty 1: 50 ohm conversion kit includes 2 SMA shorting caps, ground strap and shrink wrap.
• Qty 2: Cable 24GHz SMA-SMA Cables
• Qty 1: SOLT kit (F Short, Open, Load Through)
• Qty 1: Resource CD with IConnect® application notes, data sheets
• * Free Tektronix IConnect® Video Downloadable Training Course and Application Notes